LugerForum Discussion Forums - View Single Post

Hugh · 04-24-2001, 10:45 PM

David, I will answer some of your questions The springs are good, no need to replace them; it is a 41 byf, it did not have strawed parts originally, so not necessary to have them strawed. It has an excellent dip blue job, the only reason to refinish would be to get rid of those import and dremel tool marks; no need to change barrel, it has a very good shootable bore. Best mag to get is one of the "fxo37" ones with the black plastic or aluminum base; this was the original type for the gun. The best "cheap" mag would be a Meg Gar, if you can find one.

04-24-2001, 10:45 PM	#2
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	Re: My Dream III David, I will answer some of your questions The springs are good, no need to replace them; it is a 41 byf, it did not have strawed parts originally, so not necessary to have them strawed. It has an excellent dip blue job, the only reason to refinish would be to get rid of those import and dremel tool marks; no need to change barrel, it has a very good shootable bore. Best mag to get is one of the "fxo37" ones with the black plastic or aluminum base; this was the original type for the gun. The best "cheap" mag would be a Meg Gar, if you can find one.