parts interchange question?
it's been awhile since ive been on here. my buddy asked me to look at his brother in laws luger he bought years ago in Brazil
but never fired.
first off the gun was put together wrong, when I got the side plate off and the upper slid forward, I see the firing pin spring and plunger. Anyway pardon my lack of calling the correct parts.
first thing I noticed the hold open bar (looking down on the frame from the back of the gun it's on the right with the upper removed) anyway it's missing.
the safety lever is there but the safety bar is missing and the safety lever is busted at the bottom so it needs that too.
The gun is mix master buffed hard and reblued with a replacement barrel in 9mm.
toggle is a dmw, there is a 5 digit serial number, no tang for a stock.
My question is, if we find these parts say here or ebay, is there a difference between commercial and military German luger parts?
This thing was buffed pretty good, can't even see the date on top of the upper, hard to see the 2 digit numbers on the small parts, I was surprised the SN was still readable. This is a rebuild because it means something to the owner, so we're going to try and get it shooting again. thx. jim
|