LugerForum Discussion Forums - View Single Post

contact148 · 02-08-2020, 06:25 PM

Ok bit of an update

I decided to spend the day at the owner of this pistols house

only part NOT matching is the repro side plate we added as orig was missing

insert mag 1 dummy round action open cycle toggle firing pin wont co-ck (would slam fire if live)

side plate off same drill 30 times co-cks every time

remove trigger bar and pin same drill firing pin will NOT co-ock most times IE slam fire if live. so now I know its the plate and not the trigger parts,

used a marker to colour the inside of side plate re-install same drill remove side plate see its rubbing the sear so I file the side plate, sear channel a bit do the marker and try again takes a few tries but now it co-cks every single time I did it 100 times all is well hope to try a live fire tomorrow hand is now sore working that toggle

02-08-2020, 06:25 PM	#1
contact148 User Join Date: Jan 2020 Posts: 9 Thanks: 0 Thanked 5 Times in 2 Posts	Ok bit of an update I decided to spend the day at the owner of this pistols house only part NOT matching is the repro side plate we added as orig was missing insert mag 1 dummy round action open cycle toggle firing pin wont co-ck (would slam fire if live) side plate off same drill 30 times co-cks every time remove trigger bar and pin same drill firing pin will NOT co-ock most times IE slam fire if live. so now I know its the plate and not the trigger parts, used a marker to colour the inside of side plate re-install same drill remove side plate see its rubbing the sear so I file the side plate, sear channel a bit do the marker and try again takes a few tries but now it co-cks every single time I did it 100 times all is well hope to try a live fire tomorrow hand is now sore working that toggle Last edited by contact148; 02-08-2020 at 07:29 PM.