LugerForum Discussion Forums - View Single Post

4 Scale · 12-02-2019, 11:14 AM

I'm with GT, if a Luger is not functioning correctly the universe is out of balance.

Before bending, welding etc. I suggest careful analysis as to why the parts are loose, In my case both upper and lower had suffered corrosion which had been scrubbed away leaving a loose parts fit. Adding metal was therefore the apparent solution, and worked. If you cannot determine what caused the problem, I suggest contact an experienced Luger-fixer like GT or Lugerdoc.

IMO it is unwise to attempt a fix without first determining root cause.

12-02-2019, 11:14 AM	#13
4 Scale User Join Date: Nov 2014 Posts: 544 Thanks: 194 Thanked 490 Times in 251 Posts	I'm with GT, if a Luger is not functioning correctly the universe is out of balance. Before bending, welding etc. I suggest careful analysis as to why the parts are loose, In my case both upper and lower had suffered corrosion which had been scrubbed away leaving a loose parts fit. Adding metal was therefore the apparent solution, and worked. If you cannot determine what caused the problem, I suggest contact an experienced Luger-fixer like GT or Lugerdoc. IMO it is unwise to attempt a fix without first determining root cause.