It is fairly easy to check the bore size.
Just place the 9mm round in the muzzle and see if it is close to fitting; or even measure the bore with calipers, or see if a standard wooden pencil will go into the bore.
Post a picture of the muzzle from straight ahead- one can usually see the thicker wall of the 7,65mm even in a picture.
Magazines are the same for 9mm and 7,65mm cartridges- so the cartridge fitting the mag is not an indicator.
__________________
03man(Don Voigt); Luger student and collector.
Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie
|