LugerForum Discussion Forums - View Single Post

mrerick · 02-10-2019, 10:59 AM

Have you checked the spring and area under the extractor to be sure it's properly clean and lubricated?

The ejector should not bind in front. Small "hangups" can have an impact on the overall timing of the pistol.

The correct recoil spring is needed, as are a correctly operating magazine, magazine spring and follower. There are a range of recoil spring lengths and strengths, document in the forum FAQ document.

02-10-2019, 10:59 AM	#19
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,925 Thanks: 1,377 Thanked 3,139 Times in 1,520 Posts	Have you checked the spring and area under the extractor to be sure it's properly clean and lubricated? The ejector should not bind in front. Small "hangups" can have an impact on the overall timing of the pistol. The correct recoil spring is needed, as are a correctly operating magazine, magazine spring and follower. There are a range of recoil spring lengths and strengths, document in the forum FAQ document. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.