LugerForum Discussion Forums - View Single Post

lugerholsterrepair · 07-22-2018, 09:59 PM

"bullets" themselves hang out into space compared to the shell casings they rest in. The bullets should have NO affect on the angle of an inserted cartridge..Unless the LENGTH is causing them to rub the front face of the magazine. If this is the case, the bullet will cause lift and separation of the cartridge cases. Get a dial caliper and measure the length of your cartridges.

07-22-2018, 09:59 PM	#4
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	"bullets" themselves hang out into space compared to the shell casings they rest in. The bullets should have NO affect on the angle of an inserted cartridge..Unless the LENGTH is causing them to rub the front face of the magazine. If this is the case, the bullet will cause lift and separation of the cartridge cases. Get a dial caliper and measure the length of your cartridges. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."