Sorry, I meant GELADEN (brain lockup...).
The barrelled receiver is from a Dutch Luger made between 1912 and 1914. This can be known by the left-side crown-W inspection mark signifying Dutch Queen Wilhelmina. This Dutch pistol was placed into service (or the barrel was armory-replaced) in 1928, denoted by the date atop the barrel. GELADEN stamped on both sides of the extractor is a characteristic unique to Dutch Lugers.
The breechblock serial number is found on the left side of the breechblock, hidden by the receiver extension rail. Check for a number stamped on the bottom of the recoil stop lug (under the receiver). If (as I suspect) these are both sn 81, this indicates the entire upper part of the pistol is a matching Dutch Luger assembly. The center toggle number is stamped over the sn of a different part, a common occurrance resulting from the armory repairs necessary to keep these guns operational during their time in service.
The sear bar replacement would have been necessary as part of the conversion process from a grip safety pistol, but not part of any service-related change.
The Mauser P08 frame was made some time between mid-1937 and 1941, denoted by the characteristic Mauser "hump" at the back of the frame and the absence of a P08 stamp on the left frame panel.
It is possible that the seller of your plastic grips may have unknowingly sent you something fairly valuable (or then again, maybe not...) Photos of the back sides of the grip plates will help making this determination.
--Dwight
|