LugerForum Discussion Forums - View Single Post

4 Scale · 08-01-2017, 06:43 PM

Reset/trigger issues are not uncommon. Fortunately the fixes are often straightforward.

I would ask some more questions:
How long have you had the pistol- you mention ten rounds, or have you fired it other times?
Using snap caps, can you replicate the failure?
Using snap caps, get your daughter to replicate her technique for firing and see if it fails?
Any chance at all the side plate was not fully seated?
You should be able to check the sear plunger movement with your finger for free and correct function BTW, just remove side plate.

08-01-2017, 06:43 PM	#5
4 Scale User Join Date: Nov 2014 Posts: 544 Thanks: 194 Thanked 490 Times in 251 Posts	Reset/trigger issues are not uncommon. Fortunately the fixes are often straightforward. I would ask some more questions: How long have you had the pistol- you mention ten rounds, or have you fired it other times? Using snap caps, can you replicate the failure? Using snap caps, get your daughter to replicate her technique for firing and see if it fails? Any chance at all the side plate was not fully seated? You should be able to check the sear plunger movement with your finger for free and correct function BTW, just remove side plate.