Well,
the #1 box from white maple is finished, not perfect but close- next one I'll get it right.
I waited till the last thing to put the hinge on this one, what a struggle- took me two days to remember I put the hinge on the prototype first, then sanded the edges to match! That is what happens when you have CRS and it is two or four months in between the times you do something!
Anyway, here are some pictures- a little fuzzy cause the light was
"weak" yesterday.
One picture or two show the pieces in cut outs, I don't have a complete large kit, so I do not have the cleaning "guide" that would be in the one cut out near the end of the cleaning rod.
One of the noticeable differences between the small and long box is that the cut out for the toggle is large enough in the long box to hold the 9mm toggle when it is removed. The other "empty" cut out is for safe keeping of the 9mm ejector which has to be removed to install the sub-caliber kit.
See the WTS post for this box if you "need/want" one!
