Quote:
Originally Posted by mario17
Thanks Lifer and all,
Trying to digest your "masking tape" technique, if anybody can point me to any pic, illustrations?
after sticking tape to I need to shoot? sorry bit lost in translation.
|
Read this thread to get an idea of the area in question:
http://forum.lugerforum.com/showthre...nts#post233214 Yes, you would fire a test round.
Quote:
Originally Posted by mario17
* I also noticed that after last shot, when toggle up, I removed mag, trying to close toggle sometime it needs little help to bring it all the way down, it's kinda not closing completely itself, which might be indicator for loose spring. (?)
|
If it fails to close completely when it is released with a snap, then there is a problem. If you're releasing it to battery slowly/gently by hand, this will happen. Pull back enough to disengage from the hold-open, then let 'er fly.
Quote:
|
re. FTEject and "chipped claw" I have brass ejected from bore and stuck in the opening, so I can see it whole. so I think claw might loosing grip in the halfway?
|
It sounds as if it's
extracting OK, but it is having trouble ejecting, resulting in the "stovepipe" jam. The above suggestions would still apply for the extractor, which might contribute.