LugerForum Discussion Forums - View Single Post

John Sabato · 11-25-2015, 01:24 PM

Chances are that the solder is the simple variety. it is useless as it is, Try heating it gently till you the melting temperature of ordinary pipe or electrical solder and see if you can blow the solder out of the hole

Here is a temperature chart as a guide:

http://www.kester.com/kester-content...rt-15Feb11.pdf

(WEAR PLENTY OF PROTECTIVE GEAR IF YOU ARE GOING TO BLOW MOLTEN SOLDER OUT OF THE HOLE WITH COMPRESSED AIR!)

Lugerdoc may be able to help you with parts... or Numrich...

11-25-2015, 01:24 PM	#3
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Chances are that the solder is the simple variety. it is useless as it is, Try heating it gently till you the melting temperature of ordinary pipe or electrical solder and see if you can blow the solder out of the hole Here is a temperature chart as a guide: http://www.kester.com/kester-content...rt-15Feb11.pdf (WEAR PLENTY OF PROTECTIVE GEAR IF YOU ARE GOING TO BLOW MOLTEN SOLDER OUT OF THE HOLE WITH COMPRESSED AIR!) Lugerdoc may be able to help you with parts... or Numrich... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*