Quote:
Originally Posted by DavidJayUden
I guess the test would be to use a dummy round, or maybe an empty hull, chamber it and then pull back the toggle to see if the rim hits the ejector hits it and ejects it.
dju
|
Used a dummy round. When I pull back the toggle, the ejector goes right past the shell. DOES NOT HIT IT!
I took apart and cleaned all the innards, then emery clothed the edges, put in upside down and it slides in the slot no problem.
Still does not touch the shell rim.
I believe this is the problem, agreed?
Thanks for your help.
Terry