LugerForum Discussion Forums - View Single Post

John Sabato · 10-21-2014, 03:52 PM

I wouldn't even bother with the dummy round. Just keep working the part up and down using plenty of penetrating oil such as PB Blaster... it will eventually come out if the pin has been removed.

Once you have it out, you can polish the sides with very mild (220 grit or higher) emery cloth until it is nice and smooth and fits properly back it its slot. Make sure the spring isn't damaged before trying to reuse it.

10-21-2014, 03:52 PM	#22
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,155 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	I wouldn't even bother with the dummy round. Just keep working the part up and down using plenty of penetrating oil such as PB Blaster... it will eventually come out if the pin has been removed. Once you have it out, you can polish the sides with very mild (220 grit or higher) emery cloth until it is nice and smooth and fits properly back it its slot. Make sure the spring isn't damaged before trying to reuse it. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*