LugerForum Discussion Forums - View Single Post

cliffdropover1 · 08-13-2014, 02:47 AM

I had a Kimber Solo that no reload would work in. I found that 3.6 grains of Clays would work perfectly in this gun and felt surprisingly light. No signs of excessive pressure. Of course use any advice with caution. I am not responsible for this load. All I know is that it worked very well for me and proved to be remarkably accurate too. Forgot to mention this was for the 124 grain bullet only. I do believe this is the max load even though it felt light.

08-13-2014, 02:47 AM	#2
cliffdropover1 User Join Date: Aug 2007 Location: Kentucky Posts: 65 Thanks: 1 Thanked 9 Times in 5 Posts	I had a Kimber Solo that no reload would work in. I found that 3.6 grains of Clays would work perfectly in this gun and felt surprisingly light. No signs of excessive pressure. Of course use any advice with caution. I am not responsible for this load. All I know is that it worked very well for me and proved to be remarkably accurate too. Forgot to mention this was for the 124 grain bullet only. I do believe this is the max load even though it felt light.