Quote:
Originally Posted by rhuff
If you look closely at the numbers on the bottom of the barrel, they will be 8,08, and not 8,03. That number is the bore measurement, and should be there.
|
Richard, I believe you have transposed a couple of digits... The bore diameter would be 8,8X where the "X" is digit from 1 to 5 which is within bore diameter tolerances on the Luger blueprints. In this case, if the last digit is really a "3" then the actual bore diameter is 8,83mm.
__________________
regards, -John S
"...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..."
|