Quote:
Originally Posted by JuneGrass 8
Sieger ,
The 92 grn hard cast lead RN bullets from Kings Shooters supply that you recommended arrived before the ink on the check ( so to speak ) had dried . Many , Many thanks , if these shoot as good as they look , it will be outstanding . I loaded up 8 dummy rounds to check magazine function , which was fair , with one jam do to set back , which occurred on all rounds to one degree or another , so I have crimped them using a Lee Factory Crimp die . This appears to put a good hold on the bullet , but sets them back also . Like Mr.rhuff said ,"a work in progress". Thanks Don
|
Hi,
Did you order the .310s or the .313s?
Which sizer button are you using in your die set, the one for .308 bullets or the one for .311 bullets, as they usually have both available.
Are you loading to full length, that being 1.173 inches (this always seems long, but that's the way it is). You might want to read my sticky on how to determine proper O.A.L. when trying a new bullet. This could be very helpful.
With either lead or FMJ, I've never experienced set-back with the 7.65 Luger cartridge, so let's isolate and cure the necessary variables.
Thanks!
Sieger