LugerForum Discussion Forums - View Single Post

lugerholsterrepair · 09-02-2013, 09:04 PM

Take the top off and with just the top portion check to see if your sear bar is moving freely in and out on it's pivot. This portion will release the firing pin WITHOUT the bottom portion or the side plate. This is what I would check first. If the sear bar moves easily and fires the pistol (releases the firing pin) You will have that portion out of the way!
Then you can move on to the other sections. Trigger move with ease? section it out to troubleshoot.

09-02-2013, 09:04 PM	#7
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Take the top off and with just the top portion check to see if your sear bar is moving freely in and out on it's pivot. This portion will release the firing pin WITHOUT the bottom portion or the side plate. This is what I would check first. If the sear bar moves easily and fires the pistol (releases the firing pin) You will have that portion out of the way! Then you can move on to the other sections. Trigger move with ease? section it out to troubleshoot. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."