Quote:
Originally Posted by Olle
You must have looked at something pretty old, the modern ones work just like digital calipers, with a magnetic strip and a reading unit. I took a chance and bought some cheap ones, and they have worked great. It's a "universal fit" so it took a bit of thinking and tinkering to come up with good locations, brackets etc, but they make life so much easier. No more counting turns, just crank it and read the display.
|
Thanks for the links & pics!!!
It says the strips can be cut to suit...So I would want to order the next size longer than my travel and cut it to fit???
I have both x & y axis on my 3in1 Chinese machine...So I would need two kits??? Or three if I wanted to get z axis [quill] readout as well???
I spray a lot of chips...Does the strip & reader need to be covered from chips/lubricant???
My 3in1 [pic below] has a 40" bed but only 33" of it is really usable...And the cross feed is 18" but only 7" is usable...
I'm thinking one 35" and one 12" and I'll cut them to fit...
I'm wondering if the display is quick-changeable...can you use it for x axis first, then change leads and use it for y axis??? That would cut down the number of heads/displays...Or will the display show all three axes at once???
Edit: Oh, I see what you did...You have three displays on a 'gang' mount...Clever...
Thanks for any help you can give!!!
