LugerForum Discussion Forums - View Single Post

lugerholsterrepair · 03-05-2013, 08:37 PM

Mitch..OK You have to seperate the stock out if you don't want to create any trouble for yourself and the buyer. This stock can only be placed on an 8 inch Artillery per the ATF. I think the barrel length would have to be 16 inch to qualify as a legal gun with the stock. As it is now..with the stock it would be a short barreled rifle and worth about 10 years of Federal supervised incarceration.

There are not any good useable shots of it on your link to give any opinion as to originality, condition and thusly..value.

Are there any markings on the wood or metal stock iron? A serial number?

03-05-2013, 08:37 PM	#13
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	Mitch..OK You have to seperate the stock out if you don't want to create any trouble for yourself and the buyer. This stock can only be placed on an 8 inch Artillery per the ATF. I think the barrel length would have to be 16 inch to qualify as a legal gun with the stock. As it is now..with the stock it would be a short barreled rifle and worth about 10 years of Federal supervised incarceration. There are not any good useable shots of it on your link to give any opinion as to originality, condition and thusly..value. Are there any markings on the wood or metal stock iron? A serial number? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."