Quote:
Originally Posted by wisgro123
I followed your directions. The sear bar doesn't move and the firing pin is not released. The plunger located in the front of the sear bar pushes back easily. It springs forward into position when I release it. I reassembled the barrel, receiver and toggle assembly and pulled the trigger. I then disassembled the same parts and tried to push the sear bar. It won't move in either direction. (I have a parts map with labels so I can be sure I'm identifying the correct parts.) Should I be able to move the bar? Do you still think it's the sear bar or firing pin?
|
Hmm... when pushing the sear bar you should be pushing the front half of it towards the other side of the gun. Such as put your thumbnail on the side of the plunger and push it in towards the center of the receiver. If thats what you did and it wont release it sounds like something is binding.