LugerForum Discussion Forums - View Single Post

MFC · 02-08-2012, 12:35 AM

Your 29 DWM is not a typical rework. It was a new gun when it went to the arsenal. Most reworks were used and needed some repairs.
The two blank wood bottom mags are commercial and correct for this model. Police replacement mags will have the serial# and the number '1' for the primary, and '2' for the extra mag. The tube of the aluminum bottom mag you mentioned is cut square making the front edge stick out at the bottom. Earlier mags were cut at an angle to match the bottom of the frame. They should be the same overall length.

02-08-2012, 12:35 AM	#20
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	Your 29 DWM is not a typical rework. It was a new gun when it went to the arsenal. Most reworks were used and needed some repairs. The two blank wood bottom mags are commercial and correct for this model. Police replacement mags will have the serial# and the number '1' for the primary, and '2' for the extra mag. The tube of the aluminum bottom mag you mentioned is cut square making the front edge stick out at the bottom. Earlier mags were cut at an angle to match the bottom of the frame. They should be the same overall length. __________________ Mike C.