Quote:
Originally Posted by rhuff
There are a number of places that will rent reamers. Their rental prices are very reasonable. Now whether or not they have a 30 Luger reamer to rent is the next question.
|
Elk Ridge has one -
http://www.reamerrentals.com/Product...ctCode=30Lug.f
4D may have them too (they didn't show the 30 Mauser I rented) but you'd have to call/email & ask -
http://www.4-dproducts.com/display.p...istol+Calibers
Do you have a Colt Gov't Model in 9mm??? If not, you'll need at least the magazine, slide [complete], ejector, and recoil spring from a 9mm Gov't model for your 45...
I'm wondering if you could just cut the barrel section off a 9mm barrel and tap & thread the chamber section for a screw-in 7.65 Luger barrel...(I don't have mine in front of me)...Not one
from a Luger, but a blank chambered for 7.65 Luger and turned to the correct diameter & length...and threaded to fit the chamber section...And I would get a Colt Series 70 collet barrel bushing for it...Dremel or mill the feed ramp...
I don't have much faith in silver soldering liners in (others may); I haven't quite figured out how to keep the silver solder where you want it and not all over the whole barrel...