View Single Post
Unread 01-30-2002, 01:57 PM   #1
Orv Reichert
RIP
 
Join Date: Jun 2002
Location: SW Washington State
Posts: 339
Thanks: 0
Thanked 0 Times in 0 Posts
Default EBAY LUGER STOCK-GALE MORGAN'S COMMENT

Gale Morgan worked on one of these stocks [not the same one pictured]....I asked several questions and the following are his answers...[cited here with his permission]

=================================

I had to replace the wooden "endpiece" shown in one of the #7 pics (7d, I think)...The theory is that it was made for use in a plane (the "dovetail "clip" on the back attached to the side of the plane). The interesting thing (to me) is that it "adjusts" for all the std. bbl lengths.


A guess: WWII time, in Germany, by a "Big" metal fabricator (the pieces of that thing are thick, and punched with a VERY large/heavy press. An airplane mfg. or a"sheet metal fabricator" (like one of the machine gun manufacturers..grease gun style)...that's the best I can do....oh, as I said, it accommodates Mil., Navy, and Arty bbl lengths!!!!


The one I worked on couldn't possibly been a "prototype" because it would

have cost a zillion dollars to set up the presses to punch out the parts!!

There was nothing on that thing that looked like a "one (or two)-of-a kind"

prototype. The quality was exceptional, and the "attention to detail" was

also exceptional.


Another part of the "story" that sounds a little weird is

the reference to BATF...to my knowledge, there is nothing in BATF

regulations that prevents a company from making (and selling) such a stock.

They, of course, would have to have a disclaimer saying that it was illegal

to attach it to a "real" Luger.


By the way, one other point about the quality: It was MUCH BETTER than Chinese quality (like AK47 junk). Looked like "good" Japanese quality (like they "apply" when they are competing for a government bid)....





Orv Reichert is offline