LugerForum Discussion Forums - View Single Post

mrerick · 02-01-2011, 09:21 AM

Hi,

You have the spring and the firing pin retainer. The other thing doesn't look like a Luger part. Belt buckle part is likely.

From the photo, it looks like the front "claw" on your extractor was broken off. A front photo of the breech block face will confirm. Also, a picture of the breech block rear can confirm that it isn't damaged.

So, looks like you need a replacement extractor and a replacement firing pin.

A #2 pencil will just fit into my 7.65x21 .30 Luger barrel.

Marc

02-01-2011, 09:21 AM	#30
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	Hi, You have the spring and the firing pin retainer. The other thing doesn't look like a Luger part. Belt buckle part is likely. From the photo, it looks like the front "claw" on your extractor was broken off. A front photo of the breech block face will confirm. Also, a picture of the breech block rear can confirm that it isn't damaged. So, looks like you need a replacement extractor and a replacement firing pin. A #2 pencil will just fit into my 7.65x21 .30 Luger barrel. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.