View Single Post
Unread 10-12-2010, 12:47 AM   #36
BCMike
User
 
BCMike's Avatar
 
Join Date: Oct 2010
Location: Vancouver, B.C. Canada - A little patch of paradise where the Pacific meets the Coastal Mountains
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by whcoyote View Post
Mike:
I have never seen a Luger without a S/N on the nose of the frame. That's not to say that it never happened - just that I'm not aware of it. I collect only Imperial Military Lugers (1904-1918) so there may be some in other genres (?) that are not marked on the nose. I think this Luger was marked in the Commercial fashion: S/N on nose of frame and under barrel; last two digits of S/N under the takedown lever, under the lip of the side plate, on the left side of trigger, on rear of rear toggle link, sometimes on top edge of safety lever tab, bottom of receiver lug, underside of forward part of front toggle link (just behind the breech block). I have also seen Lugers that were commercially marked with the S/N on the safety bar and the sear bar although this is not a prescribed location.
Check all these parts and see if there are any remnants of the S/N anywhere.
Bob
Thanks Bob. Please look at my post #16 showing the front of frame with no serial #. Even if worn a lot I'm sure it would be there at least faintly. Also there is a #1 underside of slide and I assume the last 2 dogits of a serial #--57 in a couple of places.
BCMike is offline   Reply With Quote