LugerForum Discussion Forums - View Single Post

lugerholsterrepair · 05-29-2010, 10:01 PM

What is the serial #?

Ray, regardless of the serial #..this drum was not made with a pin in it. It was made with a bolt and a nut. Yours has gone AWOL and some bubba has shoved a pin in it.

Also, your winding handle is over on around 30-32 rounds capacity.. Is there ammunition in this drum?
Swing the handle open and try to move the handle to where the locking pin & spring will lock it in the nearby slot. If there is no ammunition in the drum something is causing a jam.

Jerry Burney

05-29-2010, 10:01 PM	#3
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	What is the serial #? Ray, regardless of the serial #..this drum was not made with a pin in it. It was made with a bolt and a nut. Yours has gone AWOL and some bubba has shoved a pin in it. Also, your winding handle is over on around 30-32 rounds capacity.. Is there ammunition in this drum? Swing the handle open and try to move the handle to where the locking pin & spring will lock it in the nearby slot. If there is no ammunition in the drum something is causing a jam. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." Last edited by lugerholsterrepair; 05-30-2010 at 12:41 PM.