LugerForum Discussion Forums - View Single Post - need to move front sight a tiny bit on my shooter

lugerholsterrepair · 02-15-2010, 12:21 PM

Tap it with a good stout brass punch. Don't get overly aggressive. Be sure the pistol barrel is well supported on a good surface. The dovetail sights slide pretty easily. You might look on the front, there may be a alingment notch. The Germans made a screw type sight adjustment tool to push them over.
Shouldn't be a problem.

Jerry Burney

02-15-2010, 12:21 PM	#3
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Tap it with a good stout brass punch. Don't get overly aggressive. Be sure the pistol barrel is well supported on a good surface. The dovetail sights slide pretty easily. You might look on the front, there may be a alingment notch. The Germans made a screw type sight adjustment tool to push them over. Shouldn't be a problem. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."