LugerForum Discussion Forums - View Single Post - How can I safely pull trigger after cocking?

John D. · 12-30-2001, 10:43 AM

Hi Sam...

OK - you *almost* have the technique right

Let the toggle go all the way forward - but don't pull the trigger (it will dry fire)..

Next - lift the toggle about 1/3 of the way through it's firing cycle (enough so the breechblock pulls back - but just before you feel the mainspring take effect on the toggle assembly). You will feel a definate "transition" at that point.

Now - with the toggle at that point, squeeze the trigger, and it should release the firing pin.

Once you do it a couple of times - you'll get the feel of the point you need to lift the toggle ears back to release the firing pin safely...

Hope this helps - and post back if this technique doesn't work for you, OK???

12-30-2001, 10:43 AM	#2
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Re: How can I safely pull trigger after cocking? Hi Sam... OK - you almost have the technique right Let the toggle go all the way forward - but don't pull the trigger (it will dry fire).. Next - lift the toggle about 1/3 of the way through it's firing cycle (enough so the breechblock pulls back - but just before you feel the mainspring take effect on the toggle assembly). You will feel a definate "transition" at that point. Now - with the toggle at that point, squeeze the trigger, and it should release the firing pin. Once you do it a couple of times - you'll get the feel of the point you need to lift the toggle ears back to release the firing pin safely... Hope this helps - and post back if this technique doesn't work for you, OK???