LugerForum Discussion Forums - View Single Post

lugerholsterrepair · 08-20-2009, 06:10 PM

There is a MUCH simpler way. Most people cannot come up with both types of ammo..Get a common pencil...On a .30 Luger the metal end with the rubber erasure will be a tight fit. On a 9mm it will be really loose.

PoliceLugers right too. At the muzzle end a .30 will fit to the case rim in the muzzle..with a .30 Luger round. If it's a 9mm you can see right away.

If you try to chamber a 9MM in a 30.... the toggle will in no way come close to closing.

Not all that hard to figure out really.

Jerry Burney

08-20-2009, 06:10 PM	#16
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	There is a MUCH simpler way. Most people cannot come up with both types of ammo..Get a common pencil...On a .30 Luger the metal end with the rubber erasure will be a tight fit. On a 9mm it will be really loose. PoliceLugers right too. At the muzzle end a .30 will fit to the case rim in the muzzle..with a .30 Luger round. If it's a 9mm you can see right away. If you try to chamber a 9MM in a 30.... the toggle will in no way come close to closing. Not all that hard to figure out really. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."