Quote:
Originally Posted by PhilOhio
But I still think all handgun barrels should be ramped as you have done.
|
PhilOhio -
I tried to get the barrel ramp angle as close to the frame ramp angle as possible. It's not as unsupported as it looks; it is almost exactly the same as my Lahti barrel/frame ramp, and much less than my .45 Colt auto. I've had good results with matching the barrel/frame ramps on those pistols, over the years, with no problems (knock on wood)...In any event, I don't plan on shooting any Luger with a full load; I'll load 10% less than whatever Speer recommends.
I just measured (as best I could) my barrel ramp vs my commercial & S/42 Lugers. Mine is ~.012" deeper than those two, it just looks deeper in the pics.