LugerForum Discussion Forums - View Single Post

John Sabato · 01-05-2009, 10:36 AM

Hi Howard,

I may actually have a few rounds of 7mm Weatherby in my "extras" box... I will look when I get home...

Question, since you are test firing the chamber, wouldn't a Remington 7mm Mag be close enough to "fireform" to the chamber to provide the dimensions you need to check? I am Just curious... I have never reloaded these cartridges or had both types in my possession at the same time, but since the headspace is on the magnum rim, I think this might work if the case is close in length to the Weatherby...

01-05-2009, 10:36 AM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Hi Howard, I may actually have a few rounds of 7mm Weatherby in my "extras" box... I will look when I get home... Question, since you are test firing the chamber, wouldn't a Remington 7mm Mag be close enough to "fireform" to the chamber to provide the dimensions you need to check? I am Just curious... I have never reloaded these cartridges or had both types in my possession at the same time, but since the headspace is on the magnum rim, I think this might work if the case is *close* in length to the Weatherby... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*