LugerForum Discussion Forums - View Single Post

lugerholsterrepair · 12-25-2008, 07:08 PM

Dwight..Yes of course. I was just thinking the bolt has an overlaping edge and one possibility is pressure grabbing it on the way out and with the channel for the extractor...It might be possible to account for the damage shown. On a practical side though, the extractor is pretty vulnarable there...
Whenever I have had a cartridge case blowout on the range it has taken out the magazine as that seems to be the path of least resistance although brass was sprayed into the face of the shooter...Good thing he had on shooting glasses!

Jerry Burney

12-25-2008, 07:08 PM	#18
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Dwight..Yes of course. I was just thinking the bolt has an overlaping edge and one possibility is pressure grabbing it on the way out and with the channel for the extractor...It might be possible to account for the damage shown. On a practical side though, the extractor is pretty vulnarable there... Whenever I have had a cartridge case blowout on the range it has taken out the magazine as that seems to be the path of least resistance although brass was sprayed into the face of the shooter...Good thing he had on shooting glasses! Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."