View Single Post
Unread 11-27-2008, 09:46 AM   #6
Lugerdoc
Patron
LugerForum
Patron
 
Lugerdoc's Avatar
 
Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 737 Times in 484 Posts
Default PO8 spare parts

Quote:
Originally Posted by davjed View Post
What I started with.....



What I ended up with.....



What I have left over......



Several months ago I bought a batch of Luger parts off of Gunbroker to attempt assembling a complete gun. A fellow board member installed the only good barrel and headspaced it, I got new grips off ebay, a spring kit from Wolf, and a few other small pins and parts from Numrich and finally have a firing Luger. No numbers match and there are no numbers on the take down lever, sideplate, extractor, and toggle link. The lower is quite badly pitted as is the side plate but the upper is in fair shape. It fires but jams quite a bit. I think a little more polishing of the inner rails and toggle train will help with that. Once it functions fairly well I am going to attempt bluing it myself.
The upper is a 1920/1917 #6594, the barrel is #3719-a, and the lower is ??566, the safety is marked "RUST" in the firing position.
If anyone is interested in the left overs let me know and I will take better pictures of them. The barrels are all rough inside and two have the collars ruined. The disconnector pin is stuck in one of the sear bars. One sideplate appears to be a repro and not numbered.
D, I'd be interested in your spare original side plates and takedown levers. If for sale separately, please forward close up photos and prices to me at hellerarms@webtv.net Also have parts to trade or can do a "tune-up" on your Franken Luger if desired. Lugerdoc
__________________
Tom Heller POB 398 ST.Charles, MO. 63302
Tel 636-447-3006 lugerdoc@charter.net
Lugerdoc is offline   Reply With Quote