LugerForum Discussion Forums - View Single Post

rlelvis · 02-17-2008, 08:24 PM

Could the markings have been obliterated durring rebuild/refinish or am I missing something?
The side of the extracter is marked GELADEN and there is what appears to be a U or half a 0 under the extractor but that is it.

Grips are wood, no question about it. They are slightly larger then the frame, front and rear overhang of about 1/16 inch +.

If I am not mistaken the RC on the bbl indicated an Erfurt/DWM rebuild or modification.

Also where might I look for info on the Bulgarian frame, history use of Lugers produced, etc?

Thanks Bob

02-17-2008, 08:24 PM	#6
rlelvis User Join Date: Feb 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Could the markings have been obliterated durring rebuild/refinish or am I missing something? The side of the extracter is marked GELADEN and there is what appears to be a U or half a 0 under the extractor but that is it. Grips are wood, no question about it. They are slightly larger then the frame, front and rear overhang of about 1/16 inch +. If I am not mistaken the RC on the bbl indicated an Erfurt/DWM rebuild or modification. Also where might I look for info on the Bulgarian frame, history use of Lugers produced, etc? Thanks Bob