LugerForum Discussion Forums - View Single Post

Chuck Shoun · 10-23-2001, 07:56 PM

If you shoot it, know what ammo you are using -- corrosive or non corrosive. Disassemble, clean parts with patches soaked in bore cleaner, wipe dry, oil where you see oil is needed, make sure the bore is cleaned with ammonia at the range if shooting corrosive ammo. Clean the bore with a good bore cleaner. I just might add that I have found that TetraGun grease and lubricant make a firearm work a lot better than oil alone. For example, I had lead buildup in my P239, but after a good cleaning, and swabbing with TetraGun Lubricant, no lead buildup at all in the bore.

10-23-2001, 07:56 PM	#2
Chuck Shoun User Join Date: Jun 2002 Location: Brigham City, UT Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Welcome Home Luger... If you shoot it, know what ammo you are using -- corrosive or non corrosive. Disassemble, clean parts with patches soaked in bore cleaner, wipe dry, oil where you see oil is needed, make sure the bore is cleaned with ammonia at the range if shooting corrosive ammo. Clean the bore with a good bore cleaner. I just might add that I have found that TetraGun grease and lubricant make a firearm work a lot better than oil alone. For example, I had lead buildup in my P239, but after a good cleaning, and swabbing with TetraGun Lubricant, no lead buildup at all in the bore.