Suggestion: Put Gunk brand "Liquid Wrench" on the screw and the screw thread area from inside the frame with the magazine removed. Tap it once or twice carefully with a plastic mallot and let it set for a while. Then remove the screw carefully using a hollow ground screw driver bit that fits the screw. Then clean the threads in the grip frame, and the screw. If the screw itself is damaged, replace it with a new screw. If you will put a tiny bit of gun oil on the screw before you put it back in, this may save your grief in the future.
Mauser720 - Ron
__________________
Mauser720 - Ron
"Those who do not know history are doomed to repeat it."
|