LugerForum Discussion Forums - View Single Post

Bob G · 08-09-2007, 11:05 AM

It really sounds as if the effort to re straw some of the parts has had quite a bit to do with the original problem. He states that after the re straw attempt, the pistol would go back to about 3/8ths of an inch before jamming up. He may have applied too much force to try to push the bbl.-receiver back into battery. After it became immovable he applied a hammer and punch(CRINGE) and now the major problem is it will not go anywhere near the original position. After the re straw effort, it sounds as if the receiver lug may have been hitting the take down lever?

08-09-2007, 11:05 AM	#26
Bob G User Join Date: May 2007 Location: Rhode Island Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	It really sounds as if the effort to re straw some of the parts has had quite a bit to do with the original problem. He states that after the re straw attempt, the pistol would go back to about 3/8ths of an inch before jamming up. He may have applied too much force to try to push the bbl.-receiver back into battery. After it became immovable he applied a hammer and punch(CRINGE) and now the major problem is it will not go anywhere near the original position. After the re straw effort, it sounds as if the receiver lug may have been hitting the take down lever? __________________ Do It Right The First Time!