LugerForum Discussion Forums - View Single Post

LugerVern · 07-21-2007, 08:59 PM

Brownells for tools and supplies

http://www.brownells.com/

The Mag sticking sounds like it is bent near the top, and the follower is hanging up. If no dent is present could be just squished a little at the top and easily fixed.

Good old dirt & harden grease could also be a problem, spray gun solvent to dissolve that possibility first. Follow this a good lubricant, I like WD40 but this is not the place for it, as it deadens primers, go with some other quality brand.

There use to be blanks available to straighten Mags but I havenâ??t seen one in a while, maybe some one can help you in your area.

Good Luck

Vern

07-21-2007, 08:59 PM	#1
LugerVern User Join Date: Apr 2005 Location: Virginia Posts: 563 Thanks: 1 Thanked 34 Times in 27 Posts	Brownells for tools and supplies http://www.brownells.com/ The Mag sticking sounds like it is bent near the top, and the follower is hanging up. If no dent is present could be just squished a little at the top and easily fixed. Good old dirt & harden grease could also be a problem, spray gun solvent to dissolve that possibility first. Follow this a good lubricant, I like WD40 but this is not the place for it, as it deadens primers, go with some other quality brand. There use to be blanks available to straighten Mags but I havenâ??t seen one in a while, maybe some one can help you in your area. Good Luck Vern