Quote:
Originally posted by stefanosg
I used a factory round and placed it in the seating die position on my Dillon. I then adjusted the seating die so that it hit the top of the bullet.
|
Hi:
Most modern factory rounds are too short to properly function in a Luger.
AOL is vital because of the steep angle of the Luger magazine. This is also why the magazine spring must be so strong.
If you don't have a way to properly measure OAL, RCBS sold me a little cheap caliper that I have been using for the last 27 years or so. You should consider buying one if you are going to be doing any real load development for the Luger.
Sieger
PS: Try those reduced charges.