[Steinar]

Here we go

This is the results after one day (24 hours). Think I can say for sure that this calls for a second test later on, glad I kept those patches Used one tee spoon of salt in two liters (just under a gallon), but this was probably way too much. Tried to add the oil equally over the metal pieces, still there might be spots with less oil.




For closer pictures, clink on the link under the product name;

1. Aeroshell 2F
http://forum.lugerforum.com/lfupload/1_1.jpg
2. WD-40
http://forum.lugerforum.com/lfupload/2_1.jpg
3. Mobil 1
http://forum.lugerforum.com/lfupload/3_1.jpg
4. Aluma Guard
http://forum.lugerforum.com/lfupload/4_1.jpg
5. Rem oil
http://forum.lugerforum.com/lfupload/5_1.jpg
6. Hoppies oil
http://forum.lugerforum.com/lfupload/6_1.jpg
7. Militec 1
http://forum.lugerforum.com/lfupload/7_1.jpg
8. Break Free LP
http://forum.lugerforum.com/lfupload/8_1.jpg
9. Brownells Stainless Slick
http://forum.lugerforum.com/lfupload/9_1.jpg
10. RIG +P Steinless stell
http://forum.lugerforum.com/lfupload/10_1.jpg
11. Lihium grease
http://forum.lugerforum.com/lfupload/11_1.jpg
12. Black Bear PAR-AL-Ketone
http://forum.lugerforum.com/lfupload/12_1.jpg
13. Dutch oil
http://forum.lugerforum.com/lfupload/13_1.jpg
14. Swiss grease
http://forum.lugerforum.com/lfupload/14_1.jpg
15. ATF Fluid
http://forum.lugerforum.com/lfupload/15_1.jpg
16. FP10
http://forum.lugerforum.com/lfupload/16_1.jpg
17. Eezok
http://forum.lugerforum.com/lfupload/17_1.jpg
18. Glen Boore
http://forum.lugerforum.com/lfupload/18_1.jpg
19. ---no oil---
http://forum.lugerforum.com/lfupload/19_1.jpg