LugerForum Discussion Forums - View Single Post

Chuckc · 01-16-2007, 11:28 PM

I would remove it all and prep the surface with 220 grit. This lets the rust blue formula get at the metal and would IMHO result in an even color. If you use Pilkingtons or some other commercially available formula, it will result in a different color than the original.

01-16-2007, 11:28 PM	#2
Chuckc User Join Date: Oct 2004 Location: Cave Creek, AZ Posts: 68 Thanks: 0 Thanked 0 Times in 0 Posts	Remove it all I would remove it all and prep the surface with 220 grit. This lets the rust blue formula get at the metal and would IMHO result in an even color. If you use Pilkingtons or some other commercially available formula, it will result in a different color than the original. __________________ Art in metal and wood