LugerForum Discussion Forums - View Single Post

John Sabato · 09-12-2006, 01:08 PM

To remove the mag release spring, take off the left grip (carefully so you don't chip out the part near the safety lever), and the small flat spring that is on the mag button can be pushed down at the top and slide out to the right and removed.

This should allow the mag release to move without any resistance except the magazine... press the mag release button in and then use the yardstick method to remove the bad mag...

09-12-2006, 01:08 PM	#5
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	To remove the mag release spring, take off the left grip (carefully so you don't chip out the part near the safety lever), and the small flat spring that is on the mag button can be pushed down at the top and slide out to the right and removed. This should allow the mag release to move without any resistance except the magazine... press the mag release button in and then use the yardstick method to remove the bad mag... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*