LugerForum Discussion Forums - View Single Post

shadow · 03-28-2006, 08:01 PM

The face of the breechblock is flat. If the extractor were moved back a little the bullet would sit flat. When I push the bullet flat to the breechblock the extractor rides up a little on the back of the groove in the cartridge.

I did remove the striker, and performed the same test with Winchester 115gr bullets. The action performed perfectly when cycled quickly by hand.

I will be out of town until Saturday and may not have computer access. My Mecgar mags should be waiting for me when I get home.

03-28-2006, 08:01 PM	#23
shadow User Join Date: Jan 2006 Location: Down The Shore Posts: 245 Thanks: 1 Thanked 6 Times in 4 Posts	The face of the breechblock is flat. If the extractor were moved back a little the bullet would sit flat. When I push the bullet flat to the breechblock the extractor rides up a little on the back of the groove in the cartridge. I did remove the striker, and performed the same test with Winchester 115gr bullets. The action performed perfectly when cycled quickly by hand. I will be out of town until Saturday and may not have computer access. My Mecgar mags should be waiting for me when I get home.