LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Commercial Lugers (https://forum.lugerforum.com/forumdisplay.php?f=123)
-   -   1937 LONGBARRELED MAUSER? (https://forum.lugerforum.com/showthread.php?t=5163)

cirelaw 07-30-2004 08:13 AM

1937 LONGBARRELED MAUSER?
 
I BOUGHT A 1937 DATED COMMERCIAL MAUSER, SR#5252V, ON BARREL AND CLIP, CROWN/U ON BARREL AND INSIDE SIDE PLATE, "351" ON UNDERSIDE OF BARREL, POSSIBLY LATVIAN? CONTACT ERIC AT SNOOKEM13@AOL.COM FOR CLOSUPS TKS

Lugerdoc 07-30-2004 09:09 AM

Eric, If the C/U under the barrel is narrower than the similar marks on the receiver, this maybe an E.German addition. If so, the 351 marking below if would incidacate that this barrel was added in March of 1951. TH

cirelaw 08-01-2004 09:55 AM

MY MISTAKE A SMALLER 381 ABOVE A LARGER 5252, ILL EMAIL YOU PICS ERIC TKS

Vlim 08-01-2004 12:14 PM

Hi,

Is the 381 on the barrel not an 8.81? This would make sense as the actual diameter in cm was struck on the barrel.

Pete Ebbink 08-01-2004 09:20 PM

Hi Eric,

If you cannot figure out the photo-posting routine on the LF, I would be happy to post them for you. Just send me your jpegs and I will post them for you in this discussion thread.

Don't worry about file size. I can make them fit the 180 KB limit, if needed.

Email to : "pebbink@pacbell.net"

Regards,

Pete... <img border="0" alt="[typing]" title="" src="graemlins/yltype.gif" />

Edward Tinker 08-01-2004 09:44 PM

Pete, here are the pictures, Eric sent them to me last week. Sorry I didn't post them here Eric, didn't know that is what you wanted.

Ed

http://forums.lugerforum.com/lfupload/pic_1.jpg
http://forums.lugerforum.com/lfupload/pic_2.jpg
http://forums.lugerforum.com/lfupload/pic_3.jpg
http://forums.lugerforum.com/lfupload/pic_4.jpg
http://forums.lugerforum.com/lfupload/pic_5.jpg
http://forums.lugerforum.com/lfupload/pic_6.jpg
http://forums.lugerforum.com/lfupload/pic_7.jpg
http://forums.lugerforum.com/lfupload/pic_8.jpg

cirelaw 08-02-2004 09:42 PM

this is eric, i want to thank you both for you kindness, i'll ship the luger to either of you for inspection tks again eric, esq.

Ron Wood 08-02-2004 11:24 PM

esq.! Now your "handle" can be decoded! Pretty clever.

A clear closeup of the serial number on the front of the frame and the serial number and markings on the bottom of the barrel would be a big help in analyzing your Luger, and might preclude the necessity of shipping it to someone for inspection/evaluation.

Edward Tinker 08-02-2004 11:46 PM

Ron, I told him I would be glad to see his gun, as it looks like a nice one to me, but I think the best thing is to supply a few more pictures of close ups.

:)
Ed

cirelaw 08-04-2004 05:02 AM

I BE MORE THAN HAPPY TO SEND CLOSEUP, JUST EMAIL SNOOKEM13@AOL.COM, I CAN EVEN SEND THE LUGER FOR INSPECTION ERIC 772-336-5312

cirelaw 08-04-2004 05:01 PM

RON, PLS GIVE ME YOU EMAIL ADDRESS I HAVE PICTURES, CLOSUPS AND ANOTHER LUGER, CARTURED MY MAJOR CANTEBURY OF A LUGHER BELONGING TO THE SS OSLO GARRISON COMANDEROR CALL ERIC 772-336-5312, IM PRESENTLY BUYING THE 1906 FRENCH COMMERCIAL FROM TOM AT PHOENIXINVESTMENTARMS.COM AND THANK YOU FOR YOUR ADVICE, JUST SAYSO AND ILL SHIP MY 1937 MAUSER TO YOU FOR INSPECTION, ERIC

cirelaw 08-26-2004 05:55 AM

ERIC HERE, IM INTERESTD IN ACQUIRIMG A 1920 CARBINE, IM ALREADY PURCHASING THE 1906 FRENCH COMMERCIAL FROM TOM AT PHOENIXINVESTMENTARMS.COM IM WILLING TO TRADE MY 1937 MAUSER OBERNDORF FOR A 1920 CARBINE, PLUS SOME CASH, IF ANYBODY IS INTERESTED, CONTACT ERIC 772-336-5312 OR SNOOKEM13@AOL.COM, I HAVE NEW CLOSEUPS, AND TKS TO THE LUGERFORUM FOR YOUR HELP, ERIC BRUNING J.D.


All times are GMT -4. The time now is 08:45 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com