LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   General Discussions (https://forum.lugerforum.com/forumdisplay.php?f=128)
-   -   Lubricating The Inside Of The Barrel (https://forum.lugerforum.com/showthread.php?t=41006)

cirelaw 03-22-2021 08:24 AM

Lubricating The Inside Of The Barrel
 
Does it affect the bullets velocity?

Sieger 03-22-2021 08:33 AM

Quote:

Originally Posted by cirelaw (Post 337810)
Does it affect the bullets velocity?

Hi,

Yes it does.

After a few good "fouling shots", bore will stabilize back to normal though.

This is quite obvious when watching bullet placement on the target.


Sieger

cirelaw 03-22-2021 08:39 AM

I thought so!!! If you are at your range shooting, how often or number of rounds should you clean your barrel.. What do you suggest?

Kiwi 03-22-2021 11:06 AM

Too much oil can bulge a barrel.
This is more a smaller barrel like a .22 and a heavier oil such as for longer term storage.

Before shooting I run a very light oil down the barrel (oiled patch), then a dry patch to remove excess.

cirelaw 03-22-2021 11:08 AM

Good Idea tks

Sieger 03-25-2021 04:15 PM

Quote:

Originally Posted by cirelaw (Post 337813)
I thought so!!! If you are at your range shooting, how often or number of rounds should you clean your barrel.. What do you suggest?

Hi,

Two shots should do it nicely to remove accumulated, light, oil.

I always wait until I have concluded my day at the range before I begin the clean-up process.

If your pistol is becoming fouled by simple firing, you may wish to change the burning rate of your powder.


Sieger


All times are GMT -4. The time now is 09:02 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com