LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Artillery Lugers (https://forum.lugerforum.com/forumdisplay.php?f=125)
-   -   Just how bad would this be considered? (https://forum.lugerforum.com/showthread.php?t=35255)

crffl 01-17-2016 01:19 AM

Just how bad would this be considered?
 
.

Looking at a possible trade and hoping to get some direction from those more knowledgeable than I. This is what I've been told:

it is matching on the outside.
Functioning with no issues.
The grips have no numbers on it.
The mag is a reproduction.
It is reblued.
9mm

I have no others and at first I thought this would be a decent trade for a shooter. What caught my attention is in the last pic where it appears the bluing has flaked off, I havent' seen that before or maybe a trick of the lighting? Realistically what is this worth in its current condition?

Thanks for any opinions.

http://bulk-share.slickpic.com/album...bikopma002.jpg

http://bulk-share.slickpic.com/album...psojghecia.jpg

http://bulk-share.slickpic.com/album...pseg019xkf.jpg

http://bulk-share.slickpic.com/album...psxx9oeuzs.jpg

http://bulk-share.slickpic.com/album...pscqzvgbvo.jpg

http://bulk-share.slickpic.com/album...pskbw5ptlp.jpg


http://bulk-share.slickpic.com/album...ps4prom1jk.jpg
.

ithacaartist 01-17-2016 01:32 AM

I've seen pics of worse, but this is probably as bad as it usually gets. If it weren't for the long barrel, this would make a great carry gun--it's so smooooth it would not snag.

Sergio Natali 01-17-2016 04:15 AM

Welcome to this Forum.

For what can see: heavily pitted and rebuffed, for any other consideration it'd need a proper hands on inspection, then have it checked by a serious gunsmith if you want to use it at the range.
Shoot safe.

DavidJayUden 01-17-2016 09:09 AM

Regarding value, these can be all over the place, but I'd not consider much beyond $800. Yah, she may shoot good, but she really has been thru the works.
dju

Edward Tinker 01-17-2016 09:21 AM

800-1000

You can usually get over a thousand for an artillery, but the heavy buffing might slow folks down - my reblued Erfurt artillery is the sweetest shooter I have :)

Lugerdoc 01-17-2016 10:08 AM

I recently sold a couple of better reblued, unpitted LPO8s @$850 + a bit more for repro stock/holster rig. TH

TheRomanhistorian 01-17-2016 12:15 PM

I paid $950 for a similar 1917 DWM all matching (externally) LP08 but it was just as buffed and refinished (though it came with a period magazine). One of my favourites and I thought it well worth the money.

Mac Cat 01-17-2016 01:38 PM

Sounds and looks like a good "shooter" to me.
You definitely need to have a gunsmith go through it and made sure that's part of the deal.
3 days is customary, but unless you have already lined up a gunsmith you trust, that's not long enough if you have to ship it.

The insides are pretty important.

Hopefully, the heavy buffing was limited to the exterior.
You can get it re-blued or partly re-bluing, if that concerns you.
I'd be more worried about the pitting that lead to all the buffing.
You have to wonder how the outside would have needed so much buffing, but not the inside !?

The artillery model is one of the most accurate and easy to shoot guns I have ever used.
It's sweet and nicely balanced. I have a 1917 with matching parts, which cost me $2,000.
I have shot it, but only enough to be sure it worked properly. Now I just enjoy keeping it well oiled and carefully stored. Finding a authentic holster will keep me busy for a while, too!

crffl 01-18-2016 12:40 AM

.

Thanks for all the input, much appreciated.

.

Desperado 01-18-2016 04:31 PM

I have a 1017 LP.08 shooter that is buffed like that. Be certain to check the side plate (didn't see it in the pictures). Mine was buffed as much as the rest of the pistol resulting in a loose fit. Wouldn't fire every time I squeezed the trigger. I had to replace the side plate to fix that.

If you are going to use it as a shooter, test the tangent rear sight. Grab it behind the release button (used to allow movement of the sight) and see if you can force the slide up the ramp without pressing the release button. If you can, the slide will walk up the ladder from the recoil of each shot. After two or three shots you are ramped up for 200-300 meters when you are shooting at a target 50 meters away. You will miss the paper and not know why. This seems to be a common problem with LP.08s that have seen much service. Can be fixed with a reproduction rear sight (About $350) or a plastic wire tie tightened down in front of the slider (goes under the barrel). All you really need is a good ladder, but those are rare.


All times are GMT -4. The time now is 02:58 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com