LugerForum Discussion Forums - cleaning toggle, take down and mag catch...

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)

- Lugerforum Archive (https://forum.lugerforum.com/forumdisplay.php?f=115)

- - cleaning toggle, take down and mag catch... (https://forum.lugerforum.com/showthread.php?t=3303)

tom collins

04-02-2002 12:06 PM

cleaning toggle, take down and mag catch...

anybody know how to keep the toggle, takedown and magazine catch surface from looking "rusty" after cleaning? whenever i get a new pistol and break it down for a major cleaning, these parts always end up drying with a rusty color down in the grooves. perhaps some extra oil?

Hugh	04-02-2002 12:29 PM

CLENZOIL (EOM)

Lonnie Zimmerman

04-02-2002 12:39 PM

Re: cleaning toggle, take down and mag catch...

Breakfree CLP

Doug	04-02-2002 12:53 PM

Remove the rust with brake fluid.

I posted this earlier. Take regular Dot 3 or 4 and apply with a Q tip. Allow to soak in for a few minutes. Then use fine steel wool or a bronze brush to clean the grooves. Then just wipe down with Hoppies and oil.

Thor	04-02-2002 01:07 PM

Re: cleaning toggle, take down and mag catch...

Kroil oil penetrates and gets under the oil, it will flow into all those cracks

All times are GMT -4. The time now is 07:23 PM.