LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   General Discussions (https://forum.lugerforum.com/forumdisplay.php?f=128)
-   -   1918 Erfurt Luger, my 1st one, my first post (https://forum.lugerforum.com/showthread.php?t=31884)

Danscudas 12-29-2013 07:25 PM

1918 Erfurt Luger, my 1st one, my first post
 
8 Attachment(s)
Not sure what the rules are here and if I don't do this correctly sorry ahead of time. Read for a long time last night and am very impressed with the people and knowledge that they share here.

I picked this up and gave to my wife for Christmas. Know very little about these guns and am wondering if I did OK with this purchase.

Thank you! Dan

Norme 12-29-2013 08:26 PM

Hi Dan, Welcome to the forum! Your new Luger looks like it's in original condition, and if all the parts have matching numbers it's a very nice example of a 1918 Erfurt.
Regards, Norm

Danscudas 12-29-2013 09:11 PM

Thanks Norm they all match but did not take apart to see if interior one(s?) do also. The magazine does not. So was is this a WW1 Military weapon? Any way of looking up history or build date or other information?

Maestro 12-29-2013 10:51 PM

are you really giving this to your wife? :evilgrin:
welcome :cheers:

According to Jan Still, 1918 Erfurt Lugers are reported in the observed low serial number of 304 to observed high serial number of 7538t and were manufactured with hold-open, stock lug, and relieved sear bar. Almost all have the receiver cut for the artillery rear sight. Inspection marks were stamped on all parts except springs. They all have three acceptance stamps on the right receiver. Estimated production: 175,000. One with 90% bluing is around $1,500. :cheers:

DavidJayUden 12-29-2013 10:56 PM

Definitely a WW1 military weapon. If it bears no unit markings it is pretty tough to determine just where it has been. Other than "around"...
dju

Danscudas 12-30-2013 11:15 PM

Thanks Norm, Dave and Maestro!
 
Dave where would the unit markings be? Serial number is 8046 with nothing else after the 6.

Maestro yes gave to my wife, but is a "family heirloom" to be enjoyed by all and passed down to generations after me. Does mine have receiver cut for artillery rear sight? Where is that? It looks like mine has 4 inspection(?) marks on the right receiver.

Has no pitting and at least 90% all original bluing and appears to be all no restorations, and paid $975 for it. So sounds like I did well there.

Have wanted one of these since I was "knee high to a grasshopper" and have lots of rifles, shotguns, and pistols but have to at least look at this one every day!

DavidJayUden 12-30-2013 11:47 PM

Unit markings are usually largly (and crudely) stanped on the front grip strap. Suffice it to say that if you haven't noticed them so far, they aren't there. our 1918 gun may have missed the unit marking days.
dju


All times are GMT -4. The time now is 02:00 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com