LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)

- Lugerforum Archive (https://forum.lugerforum.com/forumdisplay.php?f=115)

- - Not ejecting (https://forum.lugerforum.com/showthread.php?t=2835)

Steve

02-18-2002 09:29 PM

Not ejecting

I want to make sure I am undertanding something correctly. If a Luger is not ejecting the empty brass and the problem goes away with hotter loads, will cutting a loop off of the recoil spring help a weaker load to cycle? I am getting close to the maximum load and the problem is almost gone. I would prefer to use a weaker load and save wear and tear on the gun.

Lonnie Zimmerman

02-18-2002 10:43 PM

Re: Not ejecting

Steve; you can buy a new weaker spring from Wolff. What load do you use that you believe is getting close to max?

Lonnie

Spencer

02-19-2002 05:37 PM

Re: Not ejecting

At the range today I found the same problem with 115 gr. FMJ but no problems with 124 gr. FMJ from the same manufacturer. I have a 1939 S/42.

All times are GMT -4. The time now is 12:21 PM.